Datasheet > AN-1043

AN-1043

更新时间： 2022-06-01 19:42:57

品牌	Logo	应用领域
CYMBET		时钟
页数	文件大小	规格书
3页	277K
描述
EnerChip CC as Backup Power for a DS1390 Real-Time Clock

阅读下载

获取价格

如果您发现信息不准确，欢迎纠错

AN-1043 数据手册

AN-1043

Application Note

EnerChip™ CC as Backup Power for a DS1390 Real-Time Clock

Introduction

Cymbet EnerChips are solid state rechargeable batteries having distinguishing characteristics compared to

conventional rechargeable batteries. EnerChips have a high charge/discharge cycle life; low self-discharge;

simple voltage controlled charging; ﬂat discharge voltage proﬁle; have no ﬂammable solvents to leak or catch

ﬁre; are solder reﬂow tolerant; and are offered in low proﬁle surface mount packages.

The EnerChip CC is a surface mount package containing a rechargeable solid state battery - the EnerChip -

with integrated battery management that includes charge control, discharge cutoff circuitry, and a battery

switchover (i.e., supply supervisory) function. EnerChip storage (discharge) capacity varies by product.

EnerChips are used in applications requiring backup, bridging, or transition power to maintain real-time clock

(RTC) operation or SRAM data retention in the event of main power interruption; wireless sensing as the main

power source when energy can be harvested from the ambient power and used to constantly trickle charge the

EnerChip; and as a power source to perform housekeeping for microcontrollers (MCUs) and peripherals when

main power is interrupted, to ensure an orderly shutdown or transition to low power modes.

Many applications demand ultra low power consumption from the various system components, particularly

when system power is derived from primary or rechargeable batteries. Moreover, in systems utilizing RTCs

it is essential that when main power is interrupted, the standby power of the RTC be exceedingly low in

order to achieve maximum run time from the backup power source. A commonly used RTC is the Dallas/

Maxim DS1390. The device has a VBACKUP pin to which a backup power source such as an EnerChip can be

connected. Because the device has low operating current in backup mode - typically 500nA at 3V - a miniature

EnerChip device with integrated power management can provide up to several days of backup power to the RTC

when main power is interrupted. This Application Note describes circuits utilizing the EnerChip CC as a backup

power source for the DS1390 RTC.

A typical application circuit is shown in Figure 1. Main power is fed to both the CBC31xx and DS1390. When the

supply voltage drops below a speciﬁc threshold as detected by the CBC31xx, the EnerChip solid state battery

embedded in the EnerChip CC delivers power to the RTC through the CBC31xx VOUT pin.

Figure 1. Typical Application Circuit Using the EnerChip CC and DS1390 Real-Time Clock.

Doc AN-72-1043 Rev B

Page 1 of 3

12 3

下载PDF

型号	品牌	描述	获取价格	数据表
AN10436	NXP	TDA8932B/33(B) Class-D audio amplifier	获取价格
AN1045	STMICROELECTRONICS	ST7 S/W IMPLEMENTATION OF I2C BUS MASTER	获取价格
AN-1045	CYMBET	EnerChip CC Backup Power for Micro Crystal RV-2123 RTC	获取价格
AN-1046	CYMBET	EnerChip CC as Backup Power for a Microchip MCP79410 RTC	获取价格
AN-1047	CYMBET	EnerChip CC Real-Time Clock Backup for K60 Microcontroller	获取价格
AN-1048	CYMBET	EnerChip CC as Backup Power for a DS1340 Real-Time Clock	获取价格