Datasheet > AN-1047

AN-1047

更新时间： 2022-06-01 20:30:47

品牌	Logo	应用领域
CYMBET		微控制器时钟
页数	文件大小	规格书
3页	293K
描述
EnerChip CC Real-Time Clock Backup for K60 Microcontroller

阅读下载

获取价格

如果您发现信息不准确，欢迎纠错

AN-1047 数据手册

Preliminary

AN-1047

Application Note

EnerChip™ CC Real-Time Clock Backup for K60 Microcontroller

Introduction

Cymbet EnerChips are solid state rechargeable batteries having distinguishing characteristics compared to

conventional rechargeable batteries. EnerChips have a high charge/discharge cycle life; low self-discharge;

simple voltage controlled charging; ﬂat discharge voltage proﬁle; have no ﬂammable solvents to leak or catch

ﬁre; are solder reﬂow tolerant; and are offered in low proﬁle surface mount packages.

The EnerChip CC is a surface mount package containing a rechargeable solid state battery - the EnerChip -

with integrated battery management that includes charge control, discharge cutoff circuitry, and a battery

switchover (i.e., supply supervisory) function. EnerChip storage (discharge) capacity varies by product.

EnerChips are used in applications requiring backup, bridging, or transition power to maintain real-time clock

(RTC) operation or SRAM data retention in the event of main power interruption; wireless sensing as the main

power source when energy can be harvested from the ambient power and used to constantly trickle charge the

EnerChip; and as a power source to perform housekeeping for microcontrollers (MCUs) and peripherals when

main power is interrupted, to ensure an orderly shutdown or transition to low power modes.

Many applications demand ultra low power consumption from the various system components, particularly

when system power is derived from primary or rechargeable batteries. In systems utilizing stand-alone or

embedded RTCs, it is essential that the standby power of the RTC be very low in order to achieve maximum

run time from the backup power source when main power is interrupted. A low power MCU now available from

Freescale is the K60 family. The device has a VBAT auxiliary power pin to which a backup power source can be

connected. This Application Note describes use of the surface mount EnerChip CC as the backup power source

for the RTC embedded within the K60 MCU.

A typical application circuit is shown in Figure 1. Main power is fed to both the CBC31xx and K60 MCU. When

the supply voltage drops below a speciﬁc threshold as detected by the CBC31xx, the EnerChip solid state

battery embedded in the EnerChip CC delivers power to the MCU VBAT pin from the CBC31xx VOUT pin.

Figure 1. Application Circuit Using the EnerChip CC to Maintain the Real-Time Clock Within the K60 MCU.

Doc AN-72-1047 Rev A

Page 1 of 3

12 3

下载PDF

型号	品牌	描述	获取价格	数据表
AN-1048	CYMBET	EnerChip CC as Backup Power for a DS1340 Real-Time Clock	获取价格
AN105	VISHAY	FETS AS VOLTAGE-CONTROLLED RESISTORS	获取价格
AN-1050	CYMBET	Using the EnerChip Energy Harvesters with the TI LaunchPad	获取价格
AN-1052	CYMBET	Operating the EnerChip in High Temperature Environments	获取价格
AN-1053	CYMBET	Silicon Labs RF-to-USB2 Cymbet EH Demos	获取价格
AN106	ETC	Optoelectronic	获取价格