EVALUATION KIT AVAILABLE
MAX7323
I2C Port Expander with 4 Push-Pull
Outputs and 4 Open-Drain I/Os
General Description
Features
● 400kHz I C Serial Interface
2
The MAX7323 2-wire serial-interfaced peripheral features
eight I/O ports. Four ports are push-pull outputs and the
other four are open-drain I/O ports that are overvoltage
protected up to +6V independent of the supply voltage.
● +1.71V to +5.5V Operating Voltage
● 4 Push-Pull Output Ports Rated at 20mA Sink
Current
The four I/O ports configured as inputs are continuously
monitored for state changes (transition detection). State
changes are indicated by the open-drain INT output.
The interrupt is latched, allowing detection of transient
changes. When the MAX7323 is subsequently accessed
through the serial interface, any pending interrupt is
cleared.
● 4 Open-Drain I/O Ports Rated to 20mA Sink Current
● 4 I/O Ports Are Overvoltage Protected to +6V
● Transient Changes Are Latched, Allowing Detection
Between Read Operations
● INT Output Alerts Change on Inputs
The four push-pull and four open-drain outputs are rated
to sink 20mA and are capable of driving LEDs.
● AD0 and AD2 Inputs Select from 16 Slave Addresses
● Low 0.6µA (typ) Standby Current
The RST input clears the serial interface, terminating any
● -40°C to +125°C Operating Temperature Range
2
I C communication to or from the MAX7323.
The MAX7323 uses two address inputs with four-level
logic to allow 16 I C slave addresses. The slave address
Ordering Information
2
TOP
also determines the power-up logic state for the I/O ports,
and enables or disables internal 40kΩ pullups for the
input ports in groups of two ports.
PART
TEMP RANGE PIN-PACKAGE
MARK
MAX7323AEE+ -40°C to +125°C 16 QSOP
—
The MAX7323 is one device in a family of pin-compatible
port expanders with a choice of input ports, open-drain I/O
ports, and push-pull output ports (see Table 1).
16 TQFN-EP*
MAX7323ATE+ -40°C to +125°C
ADE
(3mm x 3mm)
The MAX7323 is available in 16-pin QSOP and 16-pin
TQFN packages, and is specified over the automotive
temperature range (-40°C to +125°C).
+Denotes a lead-free package.
*EP = Exposed pad.
Selector Guide
Applications
● Cell Phones
● SAN/NAS
● Servers
● Notebooks
● RAID
OPEN-
INTERRUPT
PUSH-PULL
OUTPUTS
PART
INPUTS
DRAIN
MASK
OUTPUTS
MAX7319
MAX7320
8
Yes
—
—
—
8
Typical Application Circuit
—
—
3.3V
MAX7321 Up to 8
MAX7322
—
Up to 8
—
—
4
0.047F
V+
4
Yes
—
µC
SCL
MAX7323
SCL
O7
O6
P5
P4
P3
P2
O1
O0
OUTPUT
OUTPUT
I/O
MAX7323 Up to 4
MAX7328 Up to 8
MAX7329 Up to 8
Up to 4
Up to 8
Up to 8
4
SDA
SDA
RST
RST
—
—
—
I/O
INT
INT
I/O
—
I/O
AD0
AD2
OUTPUT
OUTPUT
GND
Pin Configurations and Functional Diagram appear at end
of data sheet.
19-3806; Rev 2; 5/14