ICM7217
4-Digit LED Display,
Programmable Up/Down Counter
August 1997
Features
Description
• Four Decade, Presettable Up-Down Counter with
Parallel Zero Detect
The ICM7217 is a four digit, presettable up/down counter with
an onboard presettable register continuously compared to the
counter. The ICM7217 is intended for use in hard-wired
applications where thumbwheel switches are used for loading
data, and simple SPDT switches are used for chip control.
• Settable Register with Contents Continuously
Compared to Counter
• Directly Drives Multiplexed 7 Segment Common
Anode or Common Cathode LED Displays
This circuit provides multiplexed 7 segment LED display
outputs, with common anode or common cathode
configurations available. Digit and segment drivers are
provided to directly drive displays of up to 0.8 inch
character height (common anode) at a 25% duty cycle. The
frequency of the onboard multiplex oscillator may be
controlled with a single capacitor, or the oscillator may be
allowed to free run. Leading zeros can be blanked. The
data appearing at the 7 segment and BCD outputs is
latched; the content of the counter is transferred into the
latches under external control by means of the Store pin.
• On-Board Multiplex Scan Oscillator
• Schmitt Trigger On Count Input
• TTL Compatible BCD I/O Port, Carry/Borrow, Equal,
and Zero Outputs
• Display Blank Control for Lower Power Operation;
Quiescent Power Dissipation <5mW
• All Terminals Fully Protected Against Static Discharge
• Single 5V Supply Operation
The ICM7217 (common anode) and ICM7217A (common
cathode) versions are decade counters, providing
a
maximum count of 9999, while the ICM7217B (common
anode) and ICM7217C (common cathode) are intended for
timing purposes, providing a maximum count of 5959.
This circuit provides 3 main outputs; a CARRY/BORROW
output, which allows for direct cascading of counters, a
ZERO output, which indicates when the count is zero, and
an EQUAL output, which indicates when the count is equal
to the value contained in the register. Data is multiplexed to
and from the device by means of a three-state BCD I/O port.
The CARRY/BORROW, EQUAL, ZERO outputs, and the
BCD port will each drive one standard TTL load.
To permit operation in noisy environments and to prevent
multiple triggering with slowly changing inputs, the count
input is provided with a Schmitt trigger.
Input frequency is guaranteed to 2MHz, although the device will
typically run with f as high as 5MHz. Counting and comparing
IN
(EQUAL output) will typically run 750kHz maximum.
Ordering Information
PART
NUMBER
TEMP. RANGE
DISPLAY DRIVER
TYPE
COUNT OPTION/
MAX COUNT
o
( C)
PACKAGE
28 Ld PDIP
PKG. NO.
E28.6
ICM7217AIPI
ICM7217CIPl
ICM7217IJI
-25 to 85
-25 to 85
-25 to 85
-25 to 85
Common Cathode
Common Cathode
Common Anode
Common Anode
Decade/9999
Timing/5959
Decade/9999
Timing/5959
28 Ld PDIP
E28.6
28 Ld CERDIP
28 Ld CERDIP
F28.6
lCM7217BlJl
F28.6
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
http://www.intersil.com or 407-727-9207 | Copyright © Intersil Corporation 1999
File Number 3167.1
9-12
5秒后页面跳转
STM32F030C6芯片介绍：主要参数分析、引脚配置说明、功耗及封装
PCF8591数据手册解读：参数、引脚说明
一文带你了解ss8050参数、引脚配置、应用指南
深入解析AD7606高性能多通道模数转换器：资料手册参数分析
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
技术参数
数据手册
如果您发现信息不准确，
