Datasheet > HEMP150G-S240060-7L

HEMP150G-S240060-7L

更新时间： 2022-03-20 10:15:06

品牌	Logo	应用领域
HITRON		功率因数校正输入元件
页数	文件大小	规格书
2页	54K
描述
UNIVERSAL INPUT HARMONIC CORRECTION (PFC)

阅读下载

获取价格

数据手册

如果您发现信息不准确，欢迎纠错

HEMP150G-S240060-7L 数据手册

浏览型号HEMP150G-S240060-7L的Datasheet PDF文件第2页

H HiTRON

UNIVERSAL INPUT HARMONIC CORRECTION (PFC)

AC-DC MEDICAL & ITE APPLICATION EXTERNAL DESKTOP

SWITCHING ADAPTER 120-150 WATTS GREEN POWER

SINGLE OUTPUT HEMP150G SERIES

FEATURES:



ACCOMMODATE UNIVERSAL AC INPUT

MEET CEC LEVEL IV FOR 12-24V

MEET ENERGY STAR LEVEL V FOR 12-24V

MEET MEDICAL STANDARDS IEC60601-1

& ITE STANDARDS IEC60950-1



EMI MEET EN55011 & EN55022 /

FCC CLASS B



MEET UNIVERSAL SAFETY STANDARDS

CE MARKING COMPLIANCE

SPECIFICATION

INPUT SPECIFICATION

Input Voltage: Typical 90-264Vac.

Power Factor Correction (PFC) installed.

Input Connector: 3 pole AC inlet IEC320-C14(DT7)/

3 pole AC inlet IEC320-C6(DT7L)/

OUTPUT SPECIFICATION

Output Voltage: See Ratings Chart.

Output Current: See Ratings Chart.

Output Wattage: Typical 120-150 Watts.

Output Connector: Optional.

2 pole AC inlet IEC320-C8(DT8).

Input Frequency: 47-63Hz.

Inrush Current: 7.2Arms at 230Vac 50Hz.

Input Current: Typical 1.2-1.4A at 115Vac

Typical 0.6-0.7A at 230Vac.

Line Regulation: Typical ±0.1%.

Load Regulation: Typical ± 2 %.

Tolerance: Typical ±4%.

Noise & Ripple: Typical 1% peak to peak.

OVP: Built-in. (Latch)

Dielectric Withstand: Meet IEC60601-1 & IEC60950-1.

EMI: Meet EN55011 & EN55022 FCC Class B.

Hold-up Time: Typical 26.4-51.2mS at 115Vac

Typical 44.8-60.0mS at 230Vac.

No Load Power: less than 0.5W at 230Vac.

Leakage Current: Less than 0.3mA.

Adjustability: Not available.

Over Temp. Protection (OTP): Installed.

Overload Protection (OLP):

Fully protected against output overload and short circuit.

OLP set at about 110-135% rating output wattage.

Consult the factory for OLP setting.

GENERAL SPECIFICATION

Efficiency: Typical 87-90% (various with output voltage).

Switching Frequency: 40-65 KHz.

Circuit Topology: Fixed Flyback Circuit.

Transient Response: Output voltage returns in less than

1mS following a 25% load change.

Operating Temperature: 0 to +40°C without derating.

Storage Temperature: -20 to +85°C.

Cooling: Free air convection.

Construction: Impact resistant plastic enclosure case.

Power Density: 3.5-4.37 Watts/Cubic inch.

Desktop Format.

Safety Standard: Meet Medical IEC60601-1 &

ITE IEC60950-1 Class I or II.

NOTE: (1) All measurements are at nominal input, full load, and +25°C unless otherwise specified.

(2) Load regulation is measured at 115Vac or 230Vac in percentage indicate the change in output voltage as the load varied from half load to full load(%)

(3) The exact obtainable load regulation depends upon the output cord selected and load current.

(4) Due to requests in market and advances in technology, specifications subject to change without notice

For the detail of safety approval, please consult the factory.

-7-

下载PDF

与HEMP150G-S240060-7L相关器件

型号	品牌	描述	获取价格	数据表
HEMP150G-S240060-8	HITRON	UNIVERSAL INPUT HARMONIC CORRECTION (PFC)	获取价格
HEMP156G	HITRON	Energy Efficiency Level VI	获取价格
HEMP156G-S120125-7	HITRON	Energy Efficiency Level VI	获取价格
HEMP156G-S120125-7L	HITRON	Energy Efficiency Level VI	获取价格
HEMP156G-S240625-7	HITRON	Energy Efficiency Level VI	获取价格
HEMP156G-S240625-7L	HITRON	Energy Efficiency Level VI	获取价格