GI1001 THRU GI1004
GLASS PASSIVATED FAST EFFICIENT RECTIFIER
Reverse Voltage - 50 to 200 Volts
Forward Current - 1.0 Ampere
FEATURES
♦ High temperature metallurgically bonded construction
♦ Glass passivated cavity-free junction
♦ Superfast recovery time for high efficiency
♦ Low forward voltage, high current capability
♦ Capable of meeting environmental standards of
MIL-S-19500
DO-204AP
0.034 (0.86)
0.028 (0.71)
1.0 (25.4)
DIA.
MIN.
♦ Hermetically sealed package
♦ Low leakage current
♦ High surge capability
0.240 (6.1)
MAX.
♦ High temperature soldering guaranteed:
350°C/10 seconds, 0.375" (9.5mm) lead length,
5 lbs. (2.3kg) tension
0.150 (3.8)
0.100 (2.5)
DIA.
MECHANICAL DATA
Case: JEDEC DO-204AP solid glass body
Terminals: Plated axial leads, solderable per MIL-STD-750,
Method 2026
Polarity: Color band denotes cathode end
Mounting Position: Any
1.0 (25.4)
MIN.
Dimensions in inches and (millimeters)
*
Brazed lead assembly is covered by Patent No. 3,930,30
Weight: 0.02 ounce, 0.56 gram
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
SYMBOLS
VRRM
VRMS
VDC
GI1001
50
GI1002
100
70
GI1003
150
GI1004
200
UNITS
Volts
Volts
Volts
Maximum repetitive peak reverse voltage
Maximum RMS voltage
35
105
140
Maximum DC blocking voltage
50
100
150
200
Maximum average forward rectified current
0.375" (9.5mm) lead length at TL=75°C
I(AV)
1.0
Amp
Peak forward surge current
8.3ms single half sine-wave superimposed
on rated load (JEDEC Method) at TL=75°C
IFSM
30.0
Amps
Maximum instantaneous forward voltage at 1.0A
VF
IR
0.975
Volts
Maximum DC reverse current
at rated DC blocking voltage
TA=25°C
TA=100°C
2.0
50.0
µA
Maximum reverse recovery time (NOTE 1)
Typical junction capacitance (NOTE 2)
trr
25.0
45.0
ns
CJ
pF
Typical thermal resistance (NOTE 3)
RΘJA
RΘJL
65.0
20.0
°C/W
°C
(NOTE 4)
Operating junction and storage temperature range
TJ, TSTG
-65 to +175
NOTES:
(1) Reverse recovery test conditions: IF=0.5A, IR=1.0A, Irr=0.25A
(2) Measured at 1.0 MHZ and applied reverse voltage of 4.0 Volts
(3) Thermal resistance from junction to ambient at 0.375" (9.5mm) lead length and mounted on P.C.B. with 0.5 x 0.5” (12 x 12mm)
(4) Thermal resistance from junction to lead at 0.375" (9.5mm) lead length with both leads attached to heatsinks
4/98