CDM10V-2
Flexible 0-10V Dimming Solution
Feature list
•
Simplest 0-10 V design on the market. CDM10V-2 comes with following key settings:
-
-
-
1kHz PWM frequency
200μA Dimmer/Resistor Bias current
Dim-To-Off enabled
•
•
•
Wide input Vcc range from 11 to 25 V
Replaces many external components with a single chip reducing BOM and PCB space
Minimum variation from device to device
Applications
•
•
LED Drivers needing 0-10 V Dimming Circuits
Industrial and Commercial Dimmable Applications:
Luminaires, Troffers, Downlights, Sconces, Undercabinet, Office Lighting, Signage applications,
Dali applications
Product Type
Package
CDM10V-2
SOT23-6
Description
CDM10V-2 is a fully integrated 0-10 V dimming interface IC and comes in a SOT-23-6 package to cover space
requirements on small PCBs.
The device is targeted for various dimming applications in lighting. The IC can be used to transmit analog
voltage based signals from a 0-10 V dimmer or potentiometer to the dimming or PWM input of a lighting
controller IC in the form of a 5 mA current based PWM signal to drive an external opto-coupler. It replaces many
components in a traditional solution and reduces BOM and PCB space significantly.
The CDM10V-2 IC outputs a 0 - 100% PWM current signal at 1 kHz with an amplitude value of 5 mA.
Embedded digital signal processing maintains minimum variations from device to device.
Datasheet
Please read the Important Notice and Warnings at the end of this document
V1.1
www.infineon.com
2017-08-04