B07
Miniature Series 07
General Purpose Filter/Regulator
1/8" and 1/4" Port Sizes
● Compact design
● Full flow gauge ports
● Low torque, non-rising adjusting knob
● Snap action knob locks pressure setting when
pushed in
● Standard relieving models allow reduction of outlet
pressure even when the system is dead-ended
● Protects air operated devices by removing liquid and
solids contaminants
● Screw-on bowl reduces maintenance time
● Can be disassembled without the use of tools or
removal from the air line
Technical Data
Fluid: Compressed air
Maximum pressure:
Transparent bowl: 10 bar (145 psig)
Metal bowl: 17 bar (250 psig)
Operating temperature:*
Ordering Information
See Ordering Information on the following
pages.
Transparent bowl: -20° to +50°C (0° to +125°F)
Metal bowl: -20° to +65°C (0° to +150°F)
* Air supply must be dry enough to avoid ice formation at temperatures below +2°C (+35°F)
Particle removal: 5 µm or 40 µm filter element
Air quality: Within ISO 8573-1, Class 3 and Class 5 (particulates)
Typical flow at 10 bar (100 psig) inlet pressure, 6,3 bar (90 psig) set
pressure and a droop of 1 bar (15 psig) from set:
1/8" Ports: 6 dm3/s (13 scfm) with 5 µm element
1/4" Ports: 6 dm3/s (13 scfm) with 5 µm element
Nominal bowl size: 31 ml (1 oz)
Gauge ports:
ISO Symbols
1/8" PTF with PTF main ports
1/8" ISO Rc with ISO Rc main ports
1/8" ISO Rc with ISO G main ports
Drain connection: 1/8" pipe
Automatic Drain
Relieving
Manual Drain
Relieving
Automatic drain operation: Spitter type drain operates momentarily
when a rapid change in air flow occurs or when the supply
pressure is reduced.
Materials:
Body: Zinc
Bonnet: Acetal
Automatic Drain
Non-relieving
Manual Drain
Non-relieving
Valve: Brass/nitrile
Valve seat: Acetal
Bowl:
Transparent: Polycarbonate
Metal: Zinc
Element: Sintered polypropylene
Elastomers: Nitrile
Our policy is one of continuous research and development.
We reserve the right to amend, without notice, the specifications given in this document.
1/97
N/AL.8.300.300.01