AH289
HIGH VOLTAGE HALL-EFFECT SMART FAN MOTOR
CONTROLLER
General Description
Features
AH289 is a monolithic fan motor controller with Hall sensor’s
capability. It contains two complementary open-drain transistors
for motors coil driving, an automatic lock current shutdown, and
recovery protection. In addition, the Rotor-State Detection (RD)
output is for Rotor-State Detection.
•
•
•
•
•
•
•
•
•
On Chip Hall Sensor
Rotor-Locked Shutdown
Automatically Restart
Rotor-State Detection (RD) Output
Built-in Zener Protection for Output Driver
Operating Voltage: 3.8V~28V
Output Current: IO (AVE) = 400mA
Lead Free Package: SOT89-5L (Note 1)
Rotor-lock shutdown detection circuit turns off the output driver
when the rotor is blocked to avoid coil overheat. Then, the
automatic recovery circuit will restart the motor. These protected
actions are repeated and periodic during the blocked period. Until
the blocking is removed, the motor recovers and runs normally.
SOT89-5L: Available in “Green” Molding Compound
(No Br, Sb)
•
Lead Free Finish/ RoHS Compliant (Note 2)
Typical Application Circuit
D2
Vdd
(24V)
Rpu
D1
5
4
3
Coil2
48V
RD
289
Coil1
48V
1
2
D3
C1
GND
* Rpu : typical 10 Kohm
Note: The optional Capacitor C1 and Diode D3 are for power stabilization. C1 is recommended to
be E-Cap., luF/25V; D3 is recommended to be Zener Diode, VZ =27V. Which C1and D3
value need to be fine tuned to optimize design for different coils and power suppliers.
24V DC Brush-Less Fan with RD Output Function
AH289 Rev. 11
DS31052
1 of 9
www.diodes.com
APRIL 2010
© Diodes Incorporated