Data Sheet
AD3541R
Single Channel, 12-/16-Bit, 16 MUPS, Multispan, Multi-IO SPI DAC
FEATURES
GENERAL DESCRIPTION
► 12-/16-bit resolution
The AD3541R is a low drift, single channel, ultra-fast, 12-/16-bit ac-
curacy, voltage output digital-to-analog converter (DAC) that can be
configured in multiple voltage span ranges. The AD3541R operates
with a fixed 2.5 V reference.
► 16 MUPS single channel rate in fast mode
► 11 MUPS single channel rate in precision mode
► 78 ns small signal settling time to 0.1% accuracy
► 100 ns large signal settling time to 0.1% accuracy
► Ultrasmall glitch: <50 pV×s
► Ultralow latency: 5 ns
► THD: −105 dB at 1 kHz for AD3541R-16 and −95 dB at 1 kHz for
AD3541R-12
Each DAC incorporates three drift compensating feedback resistors
for the internal transimpedance amplifier (TIA) that scales the
output voltage. The device has five preconfigured output voltage
ranges: 0 V to 2.5 V, 0 V to 5 V, 0 V to 10 V, −5 V to +5 V, and −2.5
V to +7.5 V.
The AD3541RBCPZ16 (hereafter referred to as AD3541R-16) can
operate in fast mode for maximum speed or precision mode for
maximum accuracy. The AD3541RBCPZ12 (hereafter referred to as
AD3541R-12) has a single operation mode.
► 5 selectable output voltage ranges
► 1.2 V and 1.8 V logic level compatible
► Single (classic) and dual SPI modes
► Multiple error detectors, both analog and digital domains
► 2.5 V internal voltage reference, 10 ppm/°C maximum TC
► Small package: 4 mm × 4 mm LFCSP
The serial peripheral interface (SPI) can be configured in dual SPI
and single SPI (classic SPI) mode with single date rate (SDR) or
double data rate (DDR), with logical levels from 1.2 V to 1.8 V.
APPLICATIONS
The AD3541R is specified over the extended industrial temperature
range (–40°C to +105°C).
► Instrumentation
Table 1. Related Devices
► Hardware in the loop
► Process control equipment
► Medical devices
► Automated test equipment
► Data acquisition system
► Programmable voltage sources
► Optical communications
Part No.
Description
LTC6655
ADR4525
AD3552R
AD3551R
AD3542R
0.25 ppm noise, low drift precision reference
Ultralow noise, high accuracy, 2.5 V voltage reference
Dual channel, 16-bit, 33 MUPS, multispan, multi-IO SPI DAC
Single channel, 16-bit, 33 MUPS, multispan, multi-IO SPI DAC
Single channel, 12-/16-bit, 16 MUPS, multispan, multi-IO SPI DAC
FUNCTIONAL BLOCK DIAGRAM
Figure 1. Functional Block Diagram
Analog Devices is in the process of updating documentation to provide terminology and language that is culturally appropriate. This is a process
with a wide scope and will be phased in as quickly as possible. Thank you for your patience.
Rev. A
Information furnished by Analog Devices is believed to be accurate and reliable "as is". However, no responsibility is assumed by Analog
Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to
DOCUMENT FEEDBACK
change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and
registered trademarks are the property of their respective owners.
TECHNICAL SUPPORT