ACPL-570XL, ACPL-573XL, ACPL-177XL, 5962-08227
Hermetically Sealed 3.3V, Low I , Wide V , High Gain Optocouplers
F
CC
Data Sheet
Description
Features
These devices are single, dual, and quad channel, hermeti- Low power consumption
cally sealed optocouplers. The products are capable of
operation and storage over the full military temperature
3.3V Supply voltages
Dual marked with device part number and DLA
range and can be purchased as either standard product
or with full MIL-PRF-38534 Class Level H or K testing or
from DLA Drawing 5962-08227. All devices are manufac-
tured and tested on a MIL-PRF-38534 certified line and are
included in the DLA Qualified Products Database Supple-
mental Information Sheets QPDSIS-38534 as Hybrid Mi-
crocircuits.
drawing number
Manufactured and tested on a MIL-PRF-38534 Certified
Line
QPDSIS-38534, Class H and K
Three hermetically sealed package configurations
Performance guaranteed over full military temperature
range: -55°C to +125°C
Each channel contains a GaAsP light emitting diode which
is optically coupled to an integrated high gain photon
detector. The high gain output stage features an open
collector output providing both lower saturation voltage
and higher signaling speed than possible with conven-
tional photo-Darlington optocouplers.
Low input current requirement: 0.5 mA
High current transfer ratio: 1500% typical @ I = 0.5 mA
Low output saturation voltage: 0.11 V typical
1500 Vdc withstand test voltage
HCPL-4701/31, -070A/31 function compatibility
F
The supply voltage can be operated as low as 3.0V without
adversely affecting the parametric performance.
Applications
These devices have a 300% minimum CTR at an input
current of only 0.5 mA making them ideal for use in low
input current applications such as MOS, CMOS, low power
logic interfaces or line receivers.
Military and aerospace
High reliability systems
Telephone ring detection
Microprocessor system interface
Transportation, medical, and life critical systems
Isolated input line receiver
EIA RS-232-C line receiver
Voltage level shifting
Isolated input line receiver
Isolated output line driver
Logic ground isolation
Harsh industrial environments
Current loop receiver
System test equipment isolation
Process control input/output isolation
The connection of a 0.1 F bypass capacitor between V and GND is recommended.
CC
CAUTION: It is advised that normal static precautions be taken in handling and assembly
of this component to prevent damage and/or degradation which may be induced by ESD.