5秒后页面跳转
TM200 PDF预览

TM200

更新时间: 2024-01-16 06:18:20
品牌 Logo 应用领域
TRUMPOWER 医疗
页数 文件大小 规格书
2页 168K
描述
200 WATT MEDICAL POWER SUPPLIES

TM200 技术参数

是否无铅: 含铅是否Rohs认证: 不符合
生命周期:Not Recommended包装说明:FLANGE MOUNT, R-PUFM-X6
Reach Compliance Code:unknownHTS代码:8541.30.00.80
风险等级:5.78外壳连接:ISOLATED
配置:SINGLE WITH BUILT-IN SERIES DIODE最大直流栅极触发电流:100 mA
最大直流栅极触发电压:3 V快速连接描述:G-GR
螺丝端子的描述:A-K-2AKJESD-30 代码:R-PUFM-X6
最大漏电流:30 mA通态非重复峰值电流:4000 A
元件数量:1端子数量:6
最大通态电流:200000 A最高工作温度:125 °C
最低工作温度:-40 °C封装主体材料:PLASTIC/EPOXY
封装形状:RECTANGULAR封装形式:FLANGE MOUNT
峰值回流温度(摄氏度):NOT SPECIFIED认证状态:Not Qualified
最大均方根通态电流:314 A断态重复峰值电压:800 V
重复峰值反向电压:800 V子类别:Silicon Controlled Rectifiers
表面贴装:NO端子形式:UNSPECIFIED
端子位置:UPPER处于峰值回流温度下的最长时间:NOT SPECIFIED
触发设备类型:SCRBase Number Matches:1

TM200 数据手册

 浏览型号TM200的Datasheet PDF文件第2页 
TRUMPower  
200 WATT MEDICAL POWER SUPPLIES  
DESCRIPTION  
(MDD)  
TM200 SERIES  
Comprising single and multiple output models  
with 200 watts of continuous output power, the  
TM200 series is specially designed for medical  
applications. Auto-ranging input allows them to  
operate from any line voltage throughout the  
world without a selector strap. All auxiliary  
outputs are with magnetic amplifier or linear  
regulator to keep regulation. The units are  
constructed on a printed circuit board with a  
U-bracket for mechanical support and heat  
sinking.  
A cover-and-fan assembly can be  
added during manufacturing  
.
Safety Standard Approvals:  
FEATURES  
Low safety ground leakage current  
Meet EN 55011 and FCC class B  
Auto-ranging input  
UL 2601-1  
Short-circuit protection with auto-recovery  
Power Fail DetectPFDsignal  
100% burn-in at full rated load  
Optional cover-and-fan assembly  
CSA C22.2 No. 601.1  
TÜV EN60601-1  
INPUT SPECIFICATIONS  
ENVIRONMENTAL SPECIFICATIONS  
Input voltage:  
90 to 130 VAC, or 180 to  
Operating temperature:  
Storage temperature:  
Relative humidity:  
Derating:  
0ºC to +70ºC  
264 VACauto-ranging)  
-40ºC to +85ºC  
Input frequency: 47 to 63 Hz  
Input current: 4.5Armsfor 115VAC  
2.6Armsfor 230VAC  
5% to 95% non-condensing  
Derate from 100% at +50ºC  
linearly to 50% at +70ºC  
25 CFM forced air, provided  
on covered version, to be  
provided for U-bracket  
version by user  
Leakage current: 90 µA max. @ 115VAC, 60Hz  
Cooling:  
15 µA max. @ 230VAC, 50Hz  
OUTPUT SPECIFICATIONS  
Output voltage/currentSee rating chart  
GENERAL SPECIFICATIONS  
Switching frequency64KHz ±5KHz  
Efficiency:  
70% minimum on all models  
Total output power:  
Ripple and noise:  
200 watts maximum  
Hold-up time:  
Line regulation:  
Inrush current:  
12 msec minimum at 110VAC  
±0.5% maximum at full load  
20 amps @ 115VAC, or 40 amps @  
230VAC, at 25ºC cold start  
4000VAC from input to output  
1500VAC from input to ground  
500VAC from output to ground  
450,000 hours at full load at 25ºC  
ambient, calculated per  
2% peak to peak maximum  
Overvoltage protectionProvided on output #1 only; set at  
112 – 132% of its nominal output  
voltage  
Withstand voltage:  
MTBF:  
Overcurrent protectionAll outputs protected to short  
circuit conditions  
Temperature coefficientAll outputs ±0.04%/ºC maximum  
MIL-HDBK-217F  
Transient response:  
PFD signal:  
Maximum excursion of 4% or  
better on all models, recovering to  
1% of final value within 500µs  
after a 25% step load change  
EMC Performance (EN60601-1-2: 2001)  
EN55011:  
Class B conducted, Class B radiated  
FCC:  
VCCI:  
Class B conducted, Class B radiated  
Class B conducted, Class B radiated  
Harmonic distortion, Class A  
Line flicker  
ESD, ±8KV air and ±4KV contact  
Radiated immunity, 3V/m  
EN61000-3-2:  
EN61000-3-3:  
EN61000-4-2:  
EN61000-4-3:  
EN61000-4-4:  
EN61000-4-5:  
EN61000-4-6:  
EN61000-4-8:  
EN61000-4-11:  
TTL logic high for normal  
operation and TTL logic low upon  
loss of input power. This signal  
appears at least 1 ms prior to +5V  
output dropping 5% below its  
nominal value. This signal also  
provides a minimum delay of 100  
ms after +5V is within regulation.  
Fast transient/burst, ±1KV  
Surge, ±1KV diff, ±2KV com.  
Conducted immunity, 3Vrms  
Magnetic field immunity, 1A/m  
Voltage dips, 30% reduction for 500ms  
and >95% reduction for 10ms  
Interruptions, >95% for 5000ms  
Tumbler Technologies + TRUMPower  
3350 Scott Blvd., Bldg. 13, Santa Clara, California 95054, USA  
Phone: 408-988-6616 Fax: 408-988-6622 email: sales@trumpower.com Website: www.TRUMPower.com  

与TM200相关器件

型号 品牌 描述 获取价格 数据表
TM200CZ-24 MITSUBISHI HIGH POWER GENERAL USE INSULATED TYPE

获取价格

TM200CZ-2H MITSUBISHI HIGH POWER GENERAL USE INSULATED TYPE

获取价格

TM200CZ-H MITSUBISHI HIGH POWER GENERAL USE INSULATED TYPE

获取价格

TM200CZ-M MITSUBISHI HIGH POWER GENERAL USE INSULATED TYPE

获取价格

TM200-D23 TRUMPOWER 200 WATT MEDICAL POWER SUPPLIES

获取价格

TM200-D24 TRUMPOWER 200 WATT MEDICAL POWER SUPPLIES

获取价格