Datasheet > HLG10

HLG10

更新时间： 2022-12-22 20:03:04

品牌	Logo	应用领域
HITRON		开关电源开关输出元件
页数	文件大小	规格书
2页	273K
描述
AC/DC EXTERNAL WALLMOUNT ADAPTER 2-BLADE AND EUROPEAN AC PLUG SINGLE OUTPUT 5-10 WATTS LOW LEAKAGE & GREEN POWER SWITCHING POWER SUPPLIES

阅读下载

获取价格

数据手册

如果您发现信息不准确，欢迎纠错

HLG10 数据手册

H HiTRON

AC/DC EXTERNAL WALLMOUNT ADAPTER 2-BLADE AND

EUROPEAN AC PLUG SINGLE OUTPUT 5-10 WATTS LOW LEAKAGE

& GREEN POWER SWITCHING POWER SUPPLIES HLG10 SERIES

FEATURES:

ꢀ

VERY SMALL & COMPACT IN SIZE

LOW LEAKAGE & LOW WAITING POWER

EMI MEET EN 55022/FCC CLASS B

MEET USA, JAPAN & EUROPEAN SAFETY

STANDARDS

ꢀ

CE MARKING COMPLIANCE

SPECIFICATION

INPUT SPECIFICATION

OUTPUT SPECIFICATION

Output Voltage: See Ratings Chart.

Output Current: See Ratings Chart.

Output Wattage: 5-10 Watts typical.

Output Connector: Optional.

Line Regulation: 1.0 % typical.

Load Regulation: ± 5 % typical.

Noise & Ripple: 1% typical peak to peak.

OVP: Built-in. (Zener).

Input Voltage: 90-264Vac typical.

Input Connector: WM1(USA)/WM3 (Euro-Stecker)/

WM5(UK)

Input Frequency: 50/60Hz.

Inrush Current: 3.371Arms@230Vac/50Hz.

Input Current: 0.2A@115Vac, 0.09A@230Vac.

Dielectric Withstand: Meet IEC 60950-1.

EMI: Meet CISPR EN 55022/FCC Class B.

Hold-up Time: 11.2mS@115Vac, 70.4mS@230Vac typ.

Green Power: 0.2W @132Vac, 0.25W@264Vac typical.

Leakage Current: IEC 60950-1 Touch Current 0.02mA.

Overload Protection (OLP):

Fully protected against output overload and short circuit.

OLP set at about 125-150% rating output wattage.

Consult the factory for OLP setting.

GENERAL SPECIFICATION

Efficiency: 71-75% typical.

Switching Frequency: 60 KHz.

Circuit Topology: PWM IC Fixed Flyback Circuit.

Transient Response: Output voltage returns in less than

1mS following a 25% load change.

Operating Temperature: 0 to +25/35/40°C

without derating. (various with output voltage)

Storage Temperature: -20 to +85°C.

Temperature Coefficient: 0.04%/°C typical.

Cooling: Free air convection.

Construction: Impact resistant plastic enclosure case

wallmount format.

Safety Standard: Meet UL60950-1 Class II.

Power Density: 0.93-1.86 Watts/Cubic inch.

NOTE: (1) All measurements are at nominal input, full load, and +25°C unless otherwise specified.

(2) Load regulation is measured at 115Vac or 230Vac in percentage to indicate the change in output voltage as the load is varied from half load to full load (±%).

(3) The exact obtainable load regulation depends upon the output cord selected and load current. Upper data are for 6 ft. (2 m) cord AWG#18 wires.

(4) Due to requests in market and advances in technology, specifications subject to change without notice.

For the details of safety approval, please consult the factory.

-5-

下载PDF

与HLG10相关器件

型号	品牌	描述	获取价格	数据表
HLG-100	MEANWELL	100W Single Output Switching Power Supply	获取价格
HLG-100_1107	MEANWELL	100W Single Output Switching Power Supply	获取价格
HLG-100_12	MEANWELL	100W Single Output Switching Power Supply	获取价格
HLG-100-20	MEANWELL	100W Single Output Switching Power Supply	获取价格
HLG-100-24	MEANWELL	100W Single Output Switching Power Supply	获取价格
HLG-100-30	MEANWELL	100W Single Output Switching Power Supply	获取价格