EDI7F332MV
White Electronic Designs
2Mx32 FLASH MODULE
ꢀ
ꢀ
Data Polling and Toggle Bit feature for detection of
program or erase cycle completion
FEATURES
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
2Mx32 and 2x2Mx32 Densities
Based on AMD - AM29LV017B Flash Device
Fast Read Access Time - 90ns
3.3V-Only Reprogramming
Low Power Dissipation
ꢀ
ꢀ
30mA per Device Active Write Current
5µA per Device CMOS Standby Current
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
Typical Endurance >100,000 Cycles
Single 3.0V 10ꢀ Supply
Sector Erase Architecture
ꢀ
ꢀ
ꢀ
Uniform sectors of 64 Kbytes each
Any combination of sectors can be erased
Supports full chip erase
CMOS and TTL Compatible Inputs and Outputs
Commercial and Industrial Temperature Range
Package
ꢀ
Sector Protection
Hardware method that disables any
ꢀ
80 Pin SIMM (JEDEC)
ꢀ
combination of sector from write or erase
operations
DESCRIPTION
The EDI7F332MV and EDI7F2332MV are organized as
one and two banks of 2Mx32 respectively. The modules are
based onAMDsAM29LV017B- 2Mx8 Flash device in TSOP
packages which are mounted on an FR4 substrate.
ꢀ
ꢀ
Embedded Erase Algorithms
ꢀ
Automatically preprograms and erases the chip
or any combination of sectors
Embedded Program Algorithms
Both modules offer access times between 90 and 120ns
allowing for operation of high-speed microprocessors
without wait states.
ꢀ
Automatically programs and verifies data at
specified address
FIG. 1 BLOCK DIAGRAMS
EDI7F332MV-BNC: 2Mx32, 80 PIN SIMM
EDI7F2332MV-BNC: 2x2Mx32, 80 PIN SIMM
E0#
A0-A20
G#
E1#
E0#
A0-A20
G#
2M x 8
DQ0-DQ7
2M x 8
W0#
2M x 8
2M x 8
2M x 8
2M x 8
DQ0-DQ7
W0#
DQ8-DQ15
DQ16-DQ23
DQ24-DQ31
2M x 8
2M x 8
2M x 8
2M x 8
2M x 8
2M x 8
W1#
W2#
W3#
DQ8-DQ15
DQ16-DQ23
DQ24-DQ31
W1#
W2#
W3#
White Electronic Designs Corp. reserves the right to change products or specifications without notice.
Sept, 2002
Rev. 0
1
White Electronic Designs Corporation • (602) 437-1520 • www.wedc.com