BYM07-50 THRU BYM07-400
EGL34A THRU EGL34G
SURFACE MOUNT GLASS PASSIVATED JUNCTION FAST EFFICIENT RECTIFIER
Reverse Voltage - 50 to 400 Volts
Forward Current - 0.5 Ampere
DO-213AA
FEATURES
SOLDERABLE ENDS
♦ Plastic package has Underwriters Laboratory Flammability
Classification 94V-0
1st BAND
2nd BAND
♦ Capable of meeting environmental standards of MIL-S-19500
♦ For surface mount applications
♦ High temperature metallurgically bonded construction
♦ Glass passivated cavity-free junction
D1=
0.066
0.060
(1.676)
(1.524)
D2
♦ Fast switching for high efficiency
0.022 (0.559)
0.016 (0.406)
♦ High temperature soldering guaranteed:
450°C/5 seconds at terminals. Complete device submersible
temperature of 260°C for 10 seconds in solder bath
+ 0
D2 = D1
- 0.008 (0.20)
0.145 (3.683)
0.131(3.327)
1st band denotes type and polarity
2cnd band denotes voltage type
MECHANICAL DATA
Case: JEDEC DO-213AA molded plastic over glass body
Terminals: Plated terminals, solderable per MIL-STD-750,
Method 2026
*DGilmasesn-spiloanssticineinnccahpessualantdion(misillicmoeveterersd) by
Patent No. 3,996,602 and brazed-lead assembly to Patent No. 3,930,306
Polarity: Two bands indicate cathode end -1st band denotes device
type and 2nd band denotes repetitive peak reverse voltage rating
Mounting Position: Any
Weight: 0.0014 ounce, 0.036 gram
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
BYM07
-50
BYM07
-100
BYM07
-150
BYM07
-200
BYM07 BYM07
-300 -400
SYMBOLS
UNITS
Fast efficient device: 1st band is Green
Polarity color bands (2nd Band)
EGL34A
GRAY
50
EGL34B EGL34C EGL34D EGL34F EGL34G
RED
100
70
PINK
150
105
150
ORANGE BROWN YELLOW
Maximum repetitive peak reverse voltage
Maximum RMS voltage
VRRM
VRMS
VDC
200
140
200
300
210
300
400
280
400
Volts
Volts
Volts
Amp
35
Maximum DC blocking voltage
50
100
Maximum average forward rectified current at TT=75°C
I(AV)
0.5
Peak forward surge current 8.3ms single half
sine-wave superimposed on rated load (JEDEC Method)
IFSM
VF
10.0
1.25
Amps
Volts
µA
Maximum instantaneous forward voltage at 0.5A
1.35
Maximum DC reverse current
at rated DC blocking voltage
TA=25°C
TA=125°C
5.0
50.0
IR
Maximum full load reverse current,
full cycle average at TA=55°C
IR(AV)
50.0
µA
Maximum reverse recovery time (NOTE 1)
Typical junction capacitance (NOTE 2)
trr
50.0
7.0
ns
CJ
pF
Maximum thermal resistance (NOTE 3)
RΘJA
RΘJT
150.0
70.0
°C/W
°C
(NOTE 4)
Operating junction and storage temperature range
TJ, TSTG
-65 to +175
NOTES:
(1) Reverse recovery test conditions: IF=0.5A, IR=1.0A, Irr=0.25A
(2) Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts
(3) Thermal resistance from junction to ambient, 0.24 x 0.24” (6.0 x 6.0mm) copper pads to each terminal
(4) Thermal resistance from junction to terminal, 0.24 x 0.24” (6.0 x 6.0mm) copper pads to each terminal
4/98