FEATURES / BENEFITS
ꢀ All modules (including yellow) meet the ITE VTCSH
Part 3 over the full temperature range of -40°C to +74°C
ꢀ Uniform non-pixelated appearance
UNIFORM
APPEARANCE
LED
ꢀ Expanded view radiation pattern meets
ITE VTCSH-3 LED Arrow Specification
ꢀ 90% reduction in power vs. incandescent
ꢀ Long life; Up to 10 times longer than incandescent
ARROWS
ꢀ Fuse and transient suppressor incorporated for
superior line and load protection
ꢀ Convex tinted lens reduces glare and sun reflection
ꢀ Hard coated lenses for abrasion resistance
ꢀ Easy to install into existing signal enclosure
SPECIFICATIONS
ꢀ Operating Voltage Range:
ꢀ Luminance Uniformity and Color Uniformity exceed
80VAC to 135VAC (120VAC nominal)
ꢀ Operating Temperature Range: -40°C to +74°C
ꢀ Turn-on / Turn-off Time < 75 msec
ꢀ Power Factor > 0.9
ITE VTCSH-3 LED Arrow Specification requirements
ꢀ Transient suppression exceeds ITE VTCSH-3
LED Arrow Specification requirements and meets the
following standards:
ꢀ NEMA TS-2 Sec. 2.1.6 and Sec. 2.1.8
ꢀ Total Harmonic Distortion < 20%
ꢀ EC 1000-4-5, 3KV, 2 ohm source impedance
ꢀ Meets FCC Title 47, Subpart B, Section 15
ꢀ ANSI/IEEE C62, 41-2002; IEC 61000-4-12,
regulations for electrical noise
6KV, 200A, 100KHz ring wave
ꢀ Failed State Impedance > 250K ohm within 300ms
ꢀ Conforms to MIL-STD-810F for blowing rain
ꢀ Power supply is conformally coated for robust operation
ꢀ Conforms to MIL-STD-883, Test Method 2007,
for mechanical vibration
ꢀ Conforms to MIL-STD-883, Test Method 1010,
temperature cycling requirements
WE MEET THE NEW
ITE REQUIREMENTS,
EVEN YELLOW AT 74°C
ꢀ Provided with quick connect terminals and spade adapters
ꢀ Written manufacturer’s warranty available on request
ꢀ All products traceable by serial number
Dialight reserves the right to make changes at any time
in order to supply the best product possible.
Dialight Corporation
1501 Route 34 South • Farmingdale, NJ 07727 USA
Tel: (1) 732-919-3119 • Fax: (1) 732-751-5778 • www.dialight.com
MDTSARWEXCAL001_B