150D
Vishay Sprague
®
Solid-Electrolyte TANTALEX Capacitors
Hermetically-Sealed, Axial-Lead
FEATURES
• These high performance, hermetically-sealed TANTALEX
®
capacitors have set the standard for solid-electrolyte
tantalum capacitors for more than three decades.
• High capacitance, low DCL, low dissipation factor and
exceptional operating stability.
• Performance and reliability have been proven in
commercial, industrial and military applications.
• Available in four case codes and capacitors and are
supplied with plastic-film insulation.
• Terminals are solid, tinned nickel wire leads.
• The Military equivalent to the 150D is the CSR13 which is
qualified to MIL-C-39003/01.
PERFORMANCE CHARACTERISTICS
At + 85°C: Leakage current shall not exceed 10 times the
values listed in the Standard Ratings Tables.
Operating Temperature: - 55°C to + 85°C. (To + 125°C
with voltage derating.)
At +125°C: Leakage shall not exceed 15 times the values
Capacitance Tolerance: At 120 Hz, + 25°C.
10% standard. 5% available as special.
20%,
listed in the Standard Ratings Tables.
Life Test: Capacitors shall withstand rated DC
voltage applied at + 85°C for 2000 hours or derated DC
voltage applied at + 125°C for 1000 hours.
DissipationFactor: At120Hz, +25°C. Dissipationfactor, as
determined from the expression 2πfRC, shall not exceed the
values listed in the Standard Ratings Tables.
Following the life test:
DC Leakage Current (DCL Max.):
1. DCL shall not exceed 125% of the initial requirement.
2. Dissipation Factor shall meet the initial requirement.
3. Change in capacitance shall not exceed 5%.
At+25°C: Leakagecurrentshallnotexceedthevalues listed
in he Standard Ratings Tables.
DIMENSIONS in inches [millimeters]
1.500 0.250
[38.10 6.35]
1.500 0.250
D
[38.10 6.35]
DIA.
L
0.047 [1.19] MAX.
0.125 [3.18] MAX.
SOLID TINNED
NICKEL LEADS
J
MAX.
WITH INSULATING SLEEVE*
CASE
LEAD SIZE
NOMINAL
AWG
NO.
CODE
D
L
J (MAXIMUM)
DIAMETER
A
0.135 0.016
[3.43 0.41]
0.286 0.031
[7.26 0.79]
0.422
[10.720]
24
24
22
22
0.020
[0.51]
0.185 0.016
[4.70 0.41]
0.474 0.031
[12.04 0.79]
0.610
[15.490]
0.020
[0.51]
B
R
S
0.289 0.016
[7.34 0.41]
0.686 0.031
[17.42 0.79]
0.822
[20.880]
0.025
[0.64]
0.351 0.016
[8.92 0.41]
0.786 0.031
[19.96 0.79]
0.922
[23.420]
0.025
[0.64]
*When a shrink-fitted insulation is used, it shall lap over the ends of the capacitor body.
For technical questions, contact tantalum@vishay.com
Document Number: 40015
Revision 13-Jun-02
www.vishay.com
10